The Castle Creations Mamba Micro X2 is a compact high-performance brushless ESC and motor combo designed for small-scale RC vehicles. This updated Mamba Micro X2 ESC features increased voltage capability, data logging, CRYO-DRIVE technology, waterproof ESC design, and sensored motor support.
This combo includes the Mamba Micro X2 ESC paired with the Castle 1007-8450Kv sensored brushless motor. It is ideal for 1/14 and 1/16 scale vehicles weighing up to 2.75 lbs and running up to 2S LiPo with the included motor. The sensored 1007-8450Kv motor provides smooth startup, strong torque, and efficient performance.
Features:
– Mamba Micro X2 waterproof ESC
– Includes Castle 1007-8450Kv sensored brushless motor
– Ideal for 1/14 and 1/16 scale vehicles up to 2.75 lbs
– Recommended input with included motor: 2S LiPo
– ESC supports up to 4S LiPo, but included 1007-8450Kv motor is rated for 2S LiPo only
– Sensored motor capable
– SmartSense sensored/sensorless operation
– CRYO-DRIVE technology for cooler and more efficient operation
– Data logging enabled
– Auxiliary wire functionality for on-the-fly adjustments such as max power, max brake, torque control, and drag brake
– Transmitter programming for six common adjustable settings
– Programmable with Castle Link USB adapter or B-LINK Bluetooth adapter, sold separately
– Telemetry ready with compatible Futaba systems and Castle S.BUS2 telemetry link, sold separately
– Audible alerts for calibration and error conditions
– Waterproof on/off switch
– Designed and manufactured by Castle Creations in Olathe, Kansas
– Backed by Castle Creations 1-year warranty
Includes:
– Mamba Micro X2 ESC with 4mm connectors
– External 10-amp CC BEC
– Castle 1007-8450Kv sensored brushless motor
– Sensor harness
– Quick start guide
– Castle decals
ESC Specifications:
– ESC input voltage range: 2S–4S LiPo, 16.8V max
– Recommended input with included motor: 2S LiPo
– BEC: No internal BEC; external 10-amp CC BEC included
– Waterproof ESC design
– Included external CC BEC is not waterproof
– Proportional brake
– Reversible operation, can be disabled
– Waterproof on/off switch
– Cooling fan: uses 25mm fan size
– ESC size: 41.6mm x 29.4mm x 21.3mm
– ESC weight with wires: 47g / 1.66 oz
– Motor connectors: 4.0mm bullets
– Battery connector required, sold separately
– Recommended connectors: Castle 4.0mm polarized connectors, Deans Ultra Plug, or XT60
– Recommended battery connector rating: at least 40 amps
Motor Specifications:
– Motor: Castle 1007-8450Kv sensored brushless motor
– Motor type: sensored brushless
– Input voltage: 2S LiPo
– Kv rating: 8450Kv
– Max RPM: 80,000
– Motor length: 50.3mm
– Motor diameter: 28mm
– Shaft length: 15mm
– Shaft diameter: 1/8″ / 3.175mm
– Motor weight with wires: 114.8g / 4.05 oz
– Mounting holes: M2.5 at 14mm and 16mm, M3 at 19mm
– Connectors: 4mm male Castle bullet connectors on replaceable 16 gauge wire
– Includes 210mm sensor wire
Important Notes:
– Battery connector is not included and must be soldered to the ESC battery leads.
– Applying more than 16.8V will damage the ESC and void the warranty.
– This combo is limited to 2S LiPo with the included 1007-8450Kv motor.
– The ESC is waterproof but is not intended to be operated fully submerged.
– If used in wet conditions, rinse with fresh water and fully dry the unit afterward.
– Included external CC BEC is not waterproof.
– Sensor connections are not water resistant; Castle recommends using dielectric grease around the sensor wire connections after installation.
– Castle Link USB adapter or B-LINK Bluetooth adapter is required for advanced programming and is sold separately.
